Discontinuation Notice
The PMS-PD 2 has been discontinued and replaced with the improved PMS-PD3. It features improved functionality, along with the same footprint, allowing it to serve as a drop-in replacement.
Click here to view the PMS PD-3
Archived Product Details
The PMS-PD 2 allows you to easily integrate USB-C, high speed USB PD charging, and internal flash storage into your Wii portable.
Can I borrow your charger?
PMS-PD 2 is fully compliant with USB-C PD, granting your portable the convenience of high-speed charging from any USB-C PD charger or power bank. Charge speed is configurable, with power draw up to 15V 3A, through homebrew on your portable.
It is the inside that counts
Your phone does not need a flash drive sticking out the top to work. Your portable should not either. PMS-PD 2 is the easiest and most effective way to integrate internal storage on your portable Wii. This opens the door to much greater design flexibility.
Plug. Drag. Drop. Play
Any storage medium connected to the onboard USB A port will automatically be accessible through the USB C port when the system is turned off. When you plug your PMS-PD equipped device into your computer, the storage inside shows up as a USB device. This makes loading new software and backing up saves a breeze.Your storage, your way
Utilization of an onboard USB port allows for highly versatile storage options. From standard flash drives, to SD card adapters, to SSDs: PMS-PD 2 has you covered.Better fit than ever
By streaming integration with PMS-PD 2, the team at 4 Layer Tech was able to reduce the size by 33%. It also features castellated pads along the edges. These pads can serve as solder pads for wires, or soldered wire-free onto boards of your own design using our open-source footprints. Building a tidy, highly integrated portable has never been easier.Features
- USB C Connector
- USB C Power Delivery up to 45 Watts
- Onboard USB port with automatic switching for internal access through USB C port
- Onboard power button
- Castellated pads for integration into other board designs
- *PMS-PD 2 is not compatible with RVLPMS1
Documents
PMS-PD 2 Drawing
